Clicker Maker

Picture → a multi-colour clicker keychain: your artwork on a keycap, a shell that a mechanical keyboard switch snaps into. Export 3MF / STL.

1 · Artwork

Drop an image or click (PNG, JPG, WEBP, HEIC)

Flat illustrations, logos and stickers work best: few colours, no photos, gradients or shading.

Image
As printed

3 · Keycap

4 · Shell

What you need and how to put it together
  1. One MX-style keyboard switch (Cherry MX, Gateron, Kailh Box, Outemu…). Clicky ones (blue, box white, box jade) give the click sound. 3-pin or 5-pin both fit.
  2. Print the keycap face down (as exported): the colour layers are the first layers on the bed, so the face comes out smooth. No supports.
  3. Print the shell open side up. No supports.
  4. Push the switch into the shell's square hole from the top until the clips snap. Push the keycap onto the switch stem.
  5. To take the switch out, push it up through the hole in the bottom.

Switch hole too tight or loose? Change "Switch hole" by 0.05 mm. Keycap falls off or will not go on? Change "Stem fit".