Photo Layers

1 · Photo

Drop an image here or click to choose

2 · Size

Width (mm) Detail (mm per pixel) Layer height (mm) Base layers Max layers above base Smooth heights

3 · Filaments (bottom → top)

TD = transmission distance (mm): how thick a filament must be before it hides what's under it. Dark ≈ 0.5–1, light ≈ 2–6. Values here are typical; measure yours for best results. Usually order dark → light.

4 · Swaps

Swap heights

Original

Simulated print

Swap list

Load a photo and build the preview.

Export

The 3MF carries the colour changes for Bambu Studio / OrcaSlicer. Check the layer preview in your slicer before printing, and print with the same layer height and base layers set here.