Scan to Shoe

Phone scan of your foot → measurements and sizes → a 3D-printable shoe, insole or last (STL / 3MF).

How to scan your foot
  1. Use a photogrammetry scan app (for example KIRI Engine, Photo Scan mode, not LiDAR). Take 60–100 photos circling the foot at two heights.
  2. Stand with full weight on that foot, bare or in a thin patterned sock, on a flat sheet of A4 or Letter paper (it sets the scale).
  3. Crop the model to the foot plus the paper and export OBJ (zip is fine) or STL.
  4. Measure foot length against a wall: heel touching the wall, mark the longest toe, measure in mm.

One foot per upload. Scan the other foot as a second upload.

1 · Upload a scan

    2 · Your foot

    3 · Make it

    Infill per zone (gyroid):

    A last is the foot-shaped form a shoe is built around: use it to design your own shoe in CAD.

    Your data

    Scans are kept for 30 days so you can come back and change the design, then deleted.